시놀로지 100mbps - sinolloji 100mbps

질문 네트워크가 100Mbps로 잡히네요 ㅠㅠ 7

아무생각없이 네트워크 연결을 확인해보니 100m ...연결중이네요

아침에 구글링 해보니 랜카드 확인해보라고 하셔서 

케이스 열어 보드 확인해보니 인텔 wgi211at  칩셋이더라구요.

공유기 유선랜포트 확인해도 1G인데 왜... 연결은 100m로 되는지..

제가 헤놀 설치할때 부트로더 1.04b로 했는데 이게 랜카드별로 이미지가 따로 있다고 하시던데 그게 문제일가요?

하나하나 배워가는 중인데 좀 많이 어렵네요 ㅎㅎ

고수님들의 자문을 구합니다.

인터넷은 kt giga 제공 광 유무선공유기에 EFM네트웍스 아이피타임 A3002MESH 확장연결하여 사용중입니다. 타오나스는 현재 EFM네트웍스 아이피타임 A3002MESH에 연결되어있구요.

I bought a Diskstation DS1520+ and a whole unifi setup about a month ago. I had everything running great. I dabbled with port aggregation between the NAS and the UDM Pro, and thats when my trouble started. I changed the ports back to switching as I lost all connection to the NAS. Now the NAS only connects on ports 5-8 at 100bmps. It sometimes works at 1Gb but its sketchy.

I exhausted all things with Synology. They are telling me that its all pointing to the router. I tried different solution and nothing helps. I decided to plug on port into my 8-port POE switch and voila, it just works. So the NAS doesn't work on ANY port on the UDM Pro. I switched to the classic view and in there it showed that ports 5-8 were still aggregated even tho in the new view they didn't show the same. I disabled aggregation in ports 5-8 on the classic view.

The UDM Pro only has 4 ports used by other machines that do not require POE. It is connected via SFP+ to the 8-port switch. The 8-port switch has no more space so switching the NAS over there is not an option. In hindsight I should have just gone with the 16 port POE and saved myself 2 weeks of frustration and desperately trying to reach out to tech support.

Any help would be highly appreciated.

Update 10/12/21 14:46

I did a complete factory reset and started fresh. An hour+ later everything works except:

1. Topology is a total mess. Things flashing around, stuff going everywhere. I expect this to calm itself in a day or two.

2. WiFi experience is low. It used to be in the high 90s, now barely in the 70's but I see it going up already.

3. My NAS now shows 4 IP addresses. Except, UDM Pro only shows LAN1 connected, however if I ping or log into each individual address they works.

4. several devices like "smart" light switches a windows PC and 2 printers now only get a 169 IP address. I can fix that with a static IP but I want to see if it will work itself out.

What I have learned is that you shall read the manual. Just because Unifi shows the function available, doesn't mean it's actually supported or that it works.

Please Ubiquiti, take that Aggregation function out of the drop down menu as it seems I'm not the only one who fell for your sneaky traps.